Click image to view full size image
T-8 Desktop Reflow oven worked with hot air to soldering PCB, support most normal components, LEDs and kinds of ICs.
Features:
1. Crawler-type structure matched with eight heating zones can make inside temperature more accurate and well-proportioned, just need 15-20minutes to reach the working temperature,support almost all kinds of PCBs(Each zones adapts independent heating/cooling control ways,cooling zone belongs to strong wind refrigerating system.)
2.Using AC motor to drive the conveyor belt, chain type transmission way. Speed adjustment is controlled by automatic electronic analog switch, which sensitivity no more than 1 degree,control accuracy ±10mm/min.
3.Power supply support both single Phase(220V)and Three phases(380V)
4.Using Cooling fan to cool the welded PCB,or cool the heat parts inside machine to guarantee their good work,suit both lead or lead-free solder paste
5.Using Signal lights to monitor the work condition of the machine-test temperature of the machine in normal and abnormal working state .
6.Support Press Emergency Stop Button if abnormal Shutdown situation
Parameter:
|
Length*Width*Height (mm) |
2100*700*700 |
|
Peak Power(KW) |
12 |
|
Working Power(KW) |
5 |
|
Input Voltage(V) |
220/380 |
|
Conveyor Width(mm) |
300 |
|
Standard Max Height (mm) |
20 |
|
Customized Max height(mm) |
55 |
|
Max Speed of Conveyor (mm) |
1200 |
|
Packing Size |
220*80*65CM |
|
Gross Weight |
220KG |
E-mail: 